Jones & Shipman TRS2 Spindle Rebuild
- Jones & Shipman TRS2
Jones & Shipman TRS2 Spindle Repair
1800 rpm
This dressing wheel spindle started making noise and the rpm’s dropped suddenly. We disassembled the spindle and found the front bearings in very rough shape. The taper had 5 microns of run out. All critical components were checked and passed inspection. The spindle shaft was routed to our grinding department where they ground the taper with the Kellenberger grinder. The shaft was then inspected and ready for assembly. Our experienced technician assembled the spindle with new bearings and seals. The spindle was balanced and passed all quality control checks. The spindle shipped with less than 2 microns of run out. The vibration and velocity readings all show a very smooth running spindle.
Normac MGS952AM Dresser Spindle Repair
3600 rpm
grease lubrication
This Normac spindle is commonly used as a dressing spindle in the cutting tool manufacturing industry. We repair this type and many similar types for a variety of customers. The key components we look to improve during the rebuild is run out, contamination prevention, electrical stability and keeping the repairs affordable. We stock many of the parts needed for these repairs to reduce the repair turnaround and cost.
- Voumard Dresser Spindle