GMN TS80CX142 Anka spindle repair

10,000 RPM

Northland Tool & Electronics repairs several types of Anka spindles. This one in particular is a specialty of ours. We are equipped to grind the tooling interfaces in our grinding department. Special fixtures and processes have been made to make sure the HSK style tooling functions properly on the spindle repair.

The tooling locates on the taper and the face of the spindle. The face is also the nut that captures the bearings on the shaft. Since it is a nut and bearings have a loose width tolerance these spindles need to be ground to ensure proper tooling contact. We have seen many spindle repairs that were performed by our competition that were done incorrectly because they lack the proper equipment.