Heald Redhead 413

Heald Redhead 413 Spindle Repair

A bearing manufacturer sent us a Heald Red Head belt driven 413 A-Frame style spindle. The customer wanted to increase the maximum speed capability of the Heald to decrease their machine downtime from changing out the ID spindle heads. They also wanted to increase they rigidity of the spindles used at 18,000 rpm. The existing bearing arraignment of the in the spindle had a maximum speed of 17,000. Our customer wanted to run his spindle at between 8,200 and 18,000 rpm. We replaced the steel bearings with ceramic bearings and implemented design improvements. We were able to increase the maximum speed to 21,000 rpm.

This is possible by insuring all the integral spindle precision parts were measured and gauged making sure they were at proper tolerances. This is critical when increasing the speed of a spindle. The spindle was then tested at the higher rpm, vibration analysis was performed and the top speed was calculated with the data accumulated. The customer received the Heald spindle and has stated the finish and accuracy it provides is far better than before the modification. They have increased productivity with the spindle and have requested ceramic bearings in any future Heald spindle rebuilds done by Northland Tool & Electronics.  View Our Heald Spindle Repair Page Here.

Written by Sandy Smith

I can be contacted at ssmith@northlandtool.com or 1-800-774-6353