Fischer Spindle is based out of Switzerland and carries on the tradition of precision and quality the region is known for. All Fischer spindles that are rebuilt by Northland Tool & Electronics are treated with the same respect they were manufactured with. Over our many years in the spindle business we have had a relationship with Fischer spindle that has enabled us to stay current with their technology and provide you with a repair that meets and exceeds your expectations. Northland Tool & Electronics offers a cost effective and quick alternative for Fischer spindle rebuilds in North America.
Fischer Models We Commonly Repair
| AF |
FAV |
FIV |
HEN |
| HJN |
M32/34 |
M34 |
MF |
| MFL |
MFM |
MFN |
MFV |
| MFW |
SC |
SPL |
UJ |
Repair History
Fischer HJN-828
28,000 RPM
This is a good example of a straight spindle repair. We received this spindle, broke it down, cleaned and the inspected the overall dimensions. We replaced the bearings, adjusted the preload, balanced, assembled and broke in the spindle. We then checked the spindle during the final QC inspection. Once all this was complete we shipped the Fischer HJN-828 spindle back to the customer.
Fischer MFN 1045
45,000 rpm
ID grinding spindle
This spindle was crashed causing damage to the front bearing journal and the ID tooling pilot. It was necessary to grind plate grind the front journal and the pilot. We then assembled the spindle and test ran it at 45,000 rpm. After final balance and passage of our stringent final QC standards the spindle was shipped back to our customer.
