Featured Video
Spindle Breakdown Time Lapse
Andy is breaking down a spindle over the course of 3 hours.
Recommended Videos
Rod is explaining some of the issues that were found with this Pope spindle as he rebuilds it.
Denton Explains a Walter Grinder Spindle
In this video Denton is showing a BC112005. This spindle had taper runout and we had to kiss grind the tapers. See more spindles at www.northlandtool.com
In this clip, Nick shows off an NSK spindle that he is performing a cause of failure analysis on.
Northland Tool's Spindle Grinding Capabilities
In this video, Scott and some other team members explain our grinding capabilities and how it helps our customers.
Manufacturing of a Cartridge Spindle Shaft
Scott shows off a cartridge shaft for a cartridge spindle that we manufactured from scratch since the original was badly damaged.
In this video, Rod explains the causes of failure on this spindle and what we did to fix it.
Fanuc Robodrill Run Up To 24,000 RPM
In this clip, Jesse is balancing a Fanuc Robodrill using a strobe in the test room. In this test, they are running the spindle at 24,000 RPM
Okamoto Spindle Breakdown and Evaluation
In this video, Andy is breaking down a 30,000rpm oil mist spindle to evaluate the cause of failure. He explains what he found and how he found it.
Heald Grinder Breakdown and Evaluation
Nick shows off a 3,000 RPM Heald grinding spindle that he has broken down for an evaluation.
This video gives a quick visual overview of the Grind Plate Grind process. Scott is working on the Kellenburger 1000U grinder. Click the link to learn more about the GPG process.
BigPlus Spindle Repair and BigPlus Overview
In this video, Scott is explaining the difference between a cat 40 taper and the BIG-Plus taper. Northland Tool & Electronics is a Certified BIG-Plus spindle repair facility and we have done countless upgrades and repairs.
Ever wonder how small a micron is? In this video we explain what its like working in the world of micron tolerances. You can also visit this concept in our spindle repair glossary
Preloading bearings is the process of removing the internal clearance of the bearing by applying a permanent thrust load. This applied force makes the rolling elements run in a single "track" and it removes any axial play in the bearing assembly. Read more on our spindle repair glossary.
The spindle balancing room is used to balance a spindle to reduce tool chatter and increase the overall life of the spindle. In this video, Denton gives an overview of how a spindle is balanced and what tools are used to aid in the process.
Bearing contamination is one of the main causes of failure for spindles. In this video, Lee is giving an explanation of what a contaminated bearing looks like, how the contamination happened, and preventative maintenance tips.
Northland Tool and Electronics can manufacture new or replacement parts in house to expedite and improve the quality of your spindle repair. In this video, Bernard is machining new quills for a Kelleneberger Grinder
In this video, PJ is explaining what we did to repair this Daewoo DMH 400 spindle. Spindle repair techs, Denton and PJ are lowering the spindle onto the test stand and running it up to about 5K RPM. The spindle was later run up to its native 12K RPM.
In this video, Scott is explaining how he is grinding this Gamfior spindle. This spindle runs between 60K and 80K RPM and is an ID grinding spindle.
Robodrill Spindle Repair and Test
In this clip, Jess is running up a Robodrill spindle on the test stand.
Hyundai-Kia KBN 135/135C Spindle Repair
This is a short clip of us receiving a Hyundai-Kia KBN 135/135C spindle. This is a boring mill spindle capable of producing huge products. For more Hyundai-Kia Spindle repairs, please visit our blog: http://www.northlandtool.com/blog/category/kia/
Spindle Repair | Spindle Grinding
In this video, Scott is showing a RoboDrill housing that is being ground. Check out more Robodrill spindle repairs here: http://www.northlandtool.com/blog/category/robodrill/
In this video, Moe is showing a Mori Seiki SL500 Lathe Spindle, and an MH63 or MH603.
In this video, Sandy is showing an Okuma Spindle Repair up on the test stand being run up.
Spindle Repair | Final Touches | Spindle Painting
In this video, Denton is putting the finishing touches on a spindle that he's just reassembled.
Spindle Repair | Spindle Breakdown
I caught up with Andy to see how he was coming along with his current breakdown. He gives a quick overview of what he's doing.
In this video, Sandy is showing off a Daewoo spindle being run up on the test stand. For more Daewoo spindles, please visit our blog at http://www.northlandtool.com/blog
Are there any brands you don't repair?
Are there any brands you don't repair? Nope. We repair any brand you want to send to us. In this video Chris explains.
Say Hello to Northland Tool & Electronics
Learn more about the employees of northland tool here: http://www.northlandtool.com/our-spindle-staff.html
Bridgeport Spindle Repair | Shaft and Drawbar
In this video Denton is explaining what he's done to this Bridgeport spindle. In the video he is reassembling the drawbar and showing us the spindle shaft.
We had a visit from some of our spindle repair clients today. Set to spaceship disco :-)
Spindle Repair | Setting Capture
In this spindle repair video Denton is setting capture on a Cincinnati Milicron spindle.
Hitachi Seiki VM40 III & Matsuura MC-650 being run up
In this video clip there is a Hitachi Seiki VM40 III & Matsuura MC-650 being run up on the test stand. On the 8,000 RPM Hitachi Seiki VM40 III we made a new rear housing bearing sleeve, and finish ground the 90mm ID housing sleeve and 96mm OD.
In this video, we discuss the Pibo Multi Spindle. For more info please check out this link: http://www.northlandtool.com/pibo-spindle-repair.html
Heald OD Grinder Spindle Repair
Check out our blog: www.northlandtool.com/blog for info on this video. For more detailed info on Heald Spindle Repair check out our Heald Spindle Repair Page on our website: http://www.northlandtool.com/heald-spindle-repair.html
In this video clip, Andy is removing some rust from this Koyo KC300 spindle prepping it for assembly. This spindle is a 50 to 400rpm centerless grinder.
Heald Red Head Complete Assembly
Denton is assembling a Heald Red Head 405 spindle from start to finish.
Heald Red Head Spindle Overview
In this video, Denton is giving an overview of this Red Head 405 Spindle that we repaired.
In this video, Denton is giving an overview of this Red Head 405 Spindle that we repaired.
How To Balance A Spindle | Spindle Repair
In this video Denton is explaining how to balance a spindle shaft using the 2 plane balancer. We use this during the spindle repair process to ensure your bearings last longer, there is less chatter in your tooling, and less vibration when your spindle is running at full speed.
Givin Owen Showing off his INCREDIBLE dance moves
I asked Givin if he could dance. This video was his response! Thanks for letting us post your dance moves online Givin!
Bearing Failure Explanation and Bearing Overview
In this video, Lee explains what's wrong with several bearings and why they've failed. He also shows some new bearings for comparison and gives some preventative maintenance tips.
Northland Tool | Spindle Repairs November 04, 2010
In this video, you can see our spindle repair test room where we are running up several spindles, some spindle bearings, and Jerry Garcia machining some new custom parts for a spindle repair.
October 28, 2010 spindle repair - Typical Thursday Morning
Travis is cleaning a recently repaired spindle, there is an ID grind, and Andy measuring the tolerances on an OKK spindle.
Okamoto 30,000 RPM Spindle Breakdown and Evaluation
In this video, Andy is breaking down a 30,000rpm oil mist spindle to evaluate the cause of failure. He explains what he found and how he found it.
Need More Videos? Visit Our YouTube Channel for Our Full Collection: 