Thru tool coolant
We were able to determine that the rotary unions were leaking coolant into the rear of the spindle causing the grease to wash out of the bearings. Before Northland Tool was contacted another rebuilder was rebuilding the spindles at the time but did not furnish this company with the cause of failure. After 4 rebuilds this company called Northland Tool and we were able to correct the rotory union issue and save our customer from further failures and unneeded expenses.
Does your spindle need repair? GET A QUOTE TODAY
Catastrophic bearing failure was the main cause of this spindle malfunction
Continue reading to learn how Northland Tool performed this repair and converted a Weiss GHK 176239 spindle from grease-injected to permanent grease lubrication…