Ekstrom-carlson-spindle

Ekstrom Carlson Spindle Repair



CHALLENGE

Spindle was seized when we received it.  Breakdown and evaluation showed it needed replacement shafts front and rear due to spline wear.  Excessive wear to the taper and bearing journals was also noted.

SOLUTION

We manufactured new shafts, replaced bearings/wear parts, and assembled the spindle.  We then checked for spline alignment, test ran the spindle at 18,000 rpm, and balanced.

 

RESULT

This spindle passed our final quality inspection before being returned to our customer with a 1-year warranty.  We have extended the life of these spindles for the customer and the finish on their parts has improved.

Does your spindle need repair? GET A QUOTE TODAY