GMN TES60CDUX315 Spindle Rebuild



CHALLENGE

Cause of failure: #1 & #2 front bearings had separated. HSK32 manual gripper set is heavily worn. Rear housing cover loose incoming, damaged & previously welded. 3 of 4 bolts were almost completely backed out.

SOLUTION

Repair action: Clean, inspect overall dimensions. Replace bearings with steel precision bearings, gripper set, wave spring, o-rings & assembly screws. Repair rear housing cover, Adjust preload, balance, assemble and break in. Final quality control inspection.

Does your spindle need repair? GET A QUOTE TODAY

More Case Studies

Repair History - Here are examples of similar spindle repairs that may contain additional information that will help you. If you have additional questions, please contact us.