Catastrophic bearing failure was the main cause of this spindle malfunction Continue reading to learn how Northland Tool performed this repair and converted a Weiss GHK 176239 spindle from grease-injected to permanent grease lubrication……Read More
Hurco TM6 Spindle Repair
The Hurco TM6 is a compact CNC turning center. It can come fitted with this grease lubricated and belt driven spindle capable of running up to 6,000 rpm.
This Hurco TM6 spindle was very difficult to spin by hand incoming. After completing a full breakdown and evaluation, we noted that the interior of the spindle was contaminated by oil and particulate. All of the bearings were heavily contaminated and felt very poor when spun by hand. There were no dimensional deviations to note for this repair.
The following actions were performed on this YCM NSV 106AS spindle:
- Clean, inspect overall dimensions
- Replace bearings, bolts, and o-rings
After reassembly of all components, adjusting bearing preload, and undergoing break-in and testing procedures, this spindle passed our final quality inspection before being returned to our customer with a 1-year warranty.
Does your spindle need repair? GET A QUOTE TODAY
Hurco VM Series Spindle Repair
The interior of this Hurco VM series spindle had coolant contamination throughout. There was no grease left in the #1 front bearing which had a… [...]
Hurco VM1 Spindle Repair
When this Hurco VM1 spindle arrived at Northland Tool and Electronics we completed a full breakdown and evaluation. Upon inspection, we found that the #1… [...]
Hurco VM2 Spindle Repair
Our customer indicated that the spindle would heat up after a period of operation, affecting the part finish. During incoming testing, the front bearing vibration… [...]
Running this spindle too long caused deformed ball bearings and damage to the outer race Damage to the outer race is consistent with prolonged operation after spindle exhibited initial signs of needing to be rebuilt Every spindle rebuilt by North…Read More