Niigata Spindle Repair

40 taper
12,000 rpm

The front bearings on this spindle lost preload causing the spacer to spin. This galled the shaft. The front taper had been ground plate ground in the past and the chrome was chipped.

We ground plate ground the taper removing the old chrome and replacing it with new. We ground plate ground the front spacer and shaft to repair the damage. Once the dimensional work was completed in our grinding department the spindle was rebuilt in our clean room. It then was broken in and test run at 12,000 rpm.



Does your spindle need repair? GET A QUOTE TODAY

More Case Studies

Repair History - Here are examples of similar spindle repairs that may contain additional information that will help you. If you have additional questions, please contact us.