Okuma Howa 550H

6000 rpm
Stator driven
Spindle was crashed, shaft nose was cracked, rotor came loose and rubbed out on rear housing. Rear housing was egged shaped. The taper had 20+ microns of runout.
Northland Tool & Electronics replaced the bearings, ground/plate/ground the rear housing and 50 taper. Kiss ground the front journal and shoulders. Welded and machined the cracks in shaft nose.



Does your spindle need repair? GET A QUOTE TODAY

More Case Studies

Repair History - Here are examples of similar spindle repairs that may contain additional information that will help you. If you have additional questions, please contact us.