Setco BDHP72DD5MBD Spindle Repair

This spindle comes from a Campbell Grinder. The spindle was crashed into the work piece causing damage to the HSK taper. This caused run out on the wheel and vibration in the spindle. We were able to grind plate grind the HSK taper in our grinding department to bring it back to specification. After assembly and final balance the spindle was as good as new.

Possible causes of failure:

  • HSK taper is damaged
  • Bearings are damaged
  • Spindle appears to have been crashed

Details of repair:

  •   Clean, inspect overall dimensions
  •   Replace bearings
  •   Grind, chrome plate and finish grind the taper
  •   Replace the grippers
  •   Replace the seals
  •   Adjust preload, balance, assemble and break in.
  •    Final quality control inspection


Does your spindle need repair? GET A QUOTE TODAY

More Case Studies

Repair History - Here are examples of similar spindle repairs that may contain additional information that will help you. If you have additional questions, please contact us.