Our customer was having difficulty holding tolerances on their Studer grinder. They were able to narrow down the issue to the spindle assembly but they were not sure exactly what was causing the inconsistencies.
We had them ship both the oil bearing spindle and the ball bearing spindle that drives it. Our test run found that both spindles were out of acceptable tolerance levels and were probably both to blame for the problems. We rebuilt both spindles and test ran them as an assembly. Our extensive testing as an assembly insures our customer will get the optimum performance from their Spindles and their Studer grinder.
Does your spindle need repair? GET A QUOTE TODAY
Catastrophic bearing failure was the main cause of this spindle malfunction
Continue reading to learn how Northland Tool performed this repair and converted a Weiss GHK 176239 spindle from grease-injected to permanent grease lubrication…