Schneider SLC-50 Spindle Repair

Schneider SLC-50 Spindle Rebuild

Possible cause of failure:

Bearing failure from oil contamination – oil was running out the nose during disassembly

Recommended action:

Clean, inspect overall dimensions.
Replace bearings, quad ring and screws.
Adjust preload, balance, assemble and break in.
Final quality control inspection.



DETAILED CAUSE OF FAILURE

Does your spindle need repair? GET A QUOTE TODAY

More Case Studies

Repair History - Here are examples of similar spindle repairs that may contain additional information that will help you. If you have additional questions, please contact us.