Catastrophic bearing failure was the main cause of this spindle malfunction Continue reading to learn how Northland Tool performed this repair and converted a Weiss GHK 176239 spindle from grease-injected to permanent grease lubrication……Read More
Schneider Spindle Repair
This Schneider spindle is grease lubricated, belt driven, and capable of running up to 1,200 rpm.
Our customer sent us this Schneider spindle because it stopped spinning freely, the rear pulley taper had run out, and the pilot was pitted. Upon inspection, we noted that the grease had washed out of the front bearings and caused a catastrophic failure. No other dimensional deviations were noted for this repair.
The following actions were performed on this Schneider spindle:
- Clean, inspect overall dimensions
- Replace bearings, o-rings, and assembly screws
- Grind, chrome plate, and finish grind the pilot
After reassembly of all components, adjusting bearing preload, and undergoing break-in and testing procedures, this spindle passed our final quality inspection before being returned to our customer with a 1-year warranty.
Does your spindle need repair? GET A QUOTE TODAY
Schneider SLG-120 Spindle Repiar
This Schneider SLG-120 spindle was noisy when spun by hand incoming. After disassembly and evaluation, we noted that the #4 bearing felt rough when spun… [...]
Schneider CCP 103 Spindle Repair
This Schneider CCP 103 spindle was sent in for a breakdown and evaluation. Upon inspection, we noted that the front bearings failed from contamination. Grinding… [...]
Schneider SLC-50 Spindle Repair
This Schneider SLC-50 was sent in due to it failing in the machine. Upon inspection, we noted that the bearings failed from severe oil contamination. … [...]
Running this spindle too long caused deformed ball bearings and damage to the outer race Damage to the outer race is consistent with prolonged operation after spindle exhibited initial signs of needing to be rebuilt Every spindle rebuilt by North…Read More