Spindle was seized when we received it.
Breakdown evaluation showed it needed replacement shafts front and rear due to spline wear and excessive wear to the taper and bearing journals.
We manufactured new shafts, assembled the spindle, checked for spline alignment, test ran the spindle at 18,000 rpm, and balanced.
We have extended the life of these spindles for the customer. The finish on their parts has also improved.
Does your spindle need repair? GET A QUOTE TODAY
Catastrophic bearing failure was the main cause of this spindle malfunction
Continue reading to learn how Northland Tool performed this repair and converted a Weiss GHK 176239 spindle from grease-injected to permanent grease lubrication…