Anca RGX Spindle Repair

Anca RGX Spindle Rebuild

Possible cause of failure:

    • Catastrophic bearing failure from contamination, more in the front than the rear.
    • Shaft taper has 4-6 micron’s run out.

Recommended action:

  • Clean, inspect overall dimensions.
  • Replace bearings, and orings.
  • Kiss the shaft taper.
  • Adjust preload, balance, assemble and break in. Final quality control inspection.


DETAILED CAUSE OF FAILURE

Does your spindle need repair? GET A QUOTE TODAY

More Case Studies

Repair History - Here are examples of similar spindle repairs that may contain additional information that will help you. If you have additional questions, please contact us.